Posts
Hello everyone on yet another wet and windy evening. Well, I haven't felt too chilly the last two days as I've been working with my Melt Pot creating some samples for my demonstration at The Stamp Hut. I've made a range of things so here's a sneaky peek at some of what I'll have with me on Saturday.
I did take some closer pictures of these two necklaces but they looked awful, very blurred, so hope you can see some of the detail in them here. They both feature images which I got from Suze Weinberg when I was at Ranger U a couple of years ago. I eke them out as you can tell! The left one has a tiny key embedded under clear UTEE poured into a Memory Frame with the image adhered to glass inside the frame. I've used a Swivel Fastener attached to the hanging loop (at the bottom) and I Glossy Accent-ed (!) the other end to the corner of the frame. Once set I added a couple of alcohol inked Foliage flowers with inked gems in their centres - the alcohol ink just knocks back some of the bling. I then attached various charms to the chain using Mini Paper Clips, added a Hinge Clip at the top and threaded the whole piece onto a length of Lace Chain.
The right hand piece is made in the same way but with a teensy dragonfly as oppoed to a key. I added the clip at the bottom and strung a key and a letter charm from it. More Foliage and gems and some Glossy Accents drizzled around the piece to which I added some Beadazzles (that was fun!). I srung this piece onto large ball chain. These were fun to make!
Next is a card that I made using the technique which Dawn Bibby amazed Suze herself with! If you haven't tried this, or if you don't like cleaning out you Melt Pot, then do give this a try. Simply cut a piece of non stick craft sheet to fit inside the Melt Pot. You can then add various UTEE and powders without them gooking up the Pot. So, here I added a scoop of Black UTEE, a sprinkle of gold and copper Perfect Pearls and a little Bronze UTEE. It only takes a few seconds to melt and then I whipped out the craft sheet piece and place it onto another craft sheet before pressing my stamp firmly into the surface. After a few more seconds just peel away the stamp and craft sheet piece to reveal a thin, lacy edged piece that can be stuck to the front of a card or used however you wish. This card is very simple and I just used an EK Success punch (Scroll & Hearts) to add some extra interest. Simple card for a man I think...as opposed to a card for a simple man! Oh dear! 
The next card features the same technique to make the focal image using different colours. This is an example of my "looking at clouds" way of working....that is I sometimes look at an abstract thing and either something will jump out at me, or I'll try to see something in the design. This one was the former! The piece of stamped UTEE just looked like a Christmas tree to me, so I decided to add it to a Best Creations paper background and then added a border of snowflakes across the top - MS Snowflake Trim M42-70016. A bit quirky but I like it
The penultimate picture is a mixed technique piece which started out as a boring coaster. These are great - cheap to buy, a nice size to work on and you can easily pierce them to make holes for a wire or ribbon hanger. I covered the coaster with a page from an unwanted (charity shop buy) book of Fairy tales, using Multi Matte Medium to glue it in place before trimming. I then brayered the page using a Soothing Sunset Big n Juicy ink pad. To this I added another of my precious Suze W. images and the word Heart from Tim's Seasonal stickers pad. I melted natural Beeswax in the Pot and brushed it over the whole piece, thicker in some places than others. The thicker areas obscure the images underneath, but you can scrape away thin layers of the wax to re-reveal them. I then dropped a paper flower into the melted wax and then secured that to the corner using more wax. The heart was a piece that I had already made by placing a greased cookie cutter on top of a colour copied image and then pouring melted UTEE into the cutter, allowing to cool and then removing the excess paper with a finger dipped into water. I also inked and partly embossed a Grungeboard flourish before sticking these to the piece with melted wax. I added more wax over the top, scraped areas away and then added the wire hanger. 
The final piece is my favourite! Those who came on my Matchbox Shrines workshop may possiby recognise the crown which was one of the car boot treasures which were on the table to dip into. Nobody had chosen it, so I decided to use it myself! I began with a teeny canvas that I had already begun and then given up on...all I had done was used Paint Dabbers to colour it and then stamped the TH sentiment over that. I used white Beeswax to texturise the whole canvas and added another Suze image in one corner. I stamped Marion Emberson's lovely dandelion from her "Make a Wish" set. The image didn't completely take on top of the wax, but that's okay. I added the extra word and a teeny dragonfly before adding more wax layers. I cut some Maya Road chipboard wings in half and embossed them with silver and verdigris powders...just enough to leave them looking a little textured. I adhered the wings to the back of the canvas with Glossy Accents and, once they were set, I adhered the crown between them. It was an old brooch that I was able to easily snip the pin off..think it may be made from lead! I finished the piece by adding more Beadazzles held in place with Glossy Accents...not just decorative, they also help to keep the wings and crown in place. Hope you like this piece.
So, tomorrow morning I am setting of down to Bury St Edmunds which is a lovely town. I'm especially looking forward to this visit as last time I was there I discovered, too late, a whole area which I had somehow missed on my previous visits! It takes a good few hours (four and a half to be precise!) to get there, so I'll be doing some of my exploration in the dark and, probably, the wind and rain if the last few days are anything to go by! If you are in the area please do come along and say hello. Meanwhile, remember that my blog candy ends on Sunday and the winner needs to email their details to me by Tuesday, so leave a comment, if you haven't already, and pay another visit on Sunday evening to see if you've won! (I've confused myself now! Lol!)
Next is a card that I made using the technique which Dawn Bibby amazed Suze herself with! If you haven't tried this, or if you don't like cleaning out you Melt Pot, then do give this a try. Simply cut a piece of non stick craft sheet to fit inside the Melt Pot. You can then add various UTEE and powders without them gooking up the Pot. So, here I added a scoop of Black UTEE, a sprinkle of gold and copper Perfect Pearls and a little Bronze UTEE. It only takes a few seconds to melt and then I whipped out the craft sheet piece and place it onto another craft sheet before pressing my stamp firmly into the surface. After a few more seconds just peel away the stamp and craft sheet piece to reveal a thin, lacy edged piece that can be stuck to the front of a card or used however you wish. This card is very simple and I just used an EK Success punch (Scroll & Hearts) to add some extra interest. Simple card for a man I think...as opposed to a card for a simple man! Oh dear! The next card features the same technique to make the focal image using different colours. This is an example of my "looking at clouds" way of working....that is I sometimes look at an abstract thing and either something will jump out at me, or I'll try to see something in the design. This one was the former! The piece of stamped UTEE just looked like a Christmas tree to me, so I decided to add it to a Best Creations paper background and then added a border of snowflakes across the top - MS Snowflake Trim M42-70016. A bit quirky but I like itThe penultimate picture is a mixed technique piece which started out as a boring coaster. These are great - cheap to buy, a nice size to work on and you can easily pierce them to make holes for a wire or ribbon hanger. I covered the coaster with a page from an unwanted (charity shop buy) book of Fairy tales, using Multi Matte Medium to glue it in place before trimming. I then brayered the page using a Soothing Sunset Big n Juicy ink pad. To this I added another of my precious Suze W. images and the word Heart from Tim's Seasonal stickers pad. I melted natural Beeswax in the Pot and brushed it over the whole piece, thicker in some places than others. The thicker areas obscure the images underneath, but you can scrape away thin layers of the wax to re-reveal them. I then dropped a paper flower into the melted wax and then secured that to the corner using more wax. The heart was a piece that I had already made by placing a greased cookie cutter on top of a colour copied image and then pouring melted UTEE into the cutter, allowing to cool and then removing the excess paper with a finger dipped into water. I also inked and partly embossed a Grungeboard flourish before sticking these to the piece with melted wax. I added more wax over the top, scraped areas away and then added the wire hanger. The final piece is my favourite! Those who came on my Matchbox Shrines workshop may possiby recognise the crown which was one of the car boot treasures which were on the table to dip into. Nobody had chosen it, so I decided to use it myself! I began with a teeny canvas that I had already begun and then given up on...all I had done was used Paint Dabbers to colour it and then stamped the TH sentiment over that. I used white Beeswax to texturise the whole canvas and added another Suze image in one corner. I stamped Marion Emberson's lovely dandelion from her "Make a Wish" set. The image didn't completely take on top of the wax, but that's okay. I added the extra word and a teeny dragonfly before adding more wax layers. I cut some Maya Road chipboard wings in half and embossed them with silver and verdigris powders...just enough to leave them looking a little textured. I adhered the wings to the back of the canvas with Glossy Accents and, once they were set, I adhered the crown between them. It was an old brooch that I was able to easily snip the pin off..think it may be made from lead! I finished the piece by adding more Beadazzles held in place with Glossy Accents...not just decorative, they also help to keep the wings and crown in place. Hope you like this piece. So, tomorrow morning I am setting of down to Bury St Edmunds which is a lovely town. I'm especially looking forward to this visit as last time I was there I discovered, too late, a whole area which I had somehow missed on my previous visits! It takes a good few hours (four and a half to be precise!) to get there, so I'll be doing some of my exploration in the dark and, probably, the wind and rain if the last few days are anything to go by! If you are in the area please do come along and say hello. Meanwhile, remember that my blog candy ends on Sunday and the winner needs to email their details to me by Tuesday, so leave a comment, if you haven't already, and pay another visit on Sunday evening to see if you've won! (I've confused myself now! Lol!)Have a great weekend whatever you are getting up to, and see you back here on Sunday. Lindsay
